Standard Dimensions (Unless Shown Otherwise on Drawing):

• Hole Diameter: ⁹/₁₆" (14mm)
• Hole Spacing (From End): ¹³/₁₆" (21mm)
• Hole Spacing (On-Center): 1 ⁷/₈" (48mm)
• Width: 1 ⁵/₈" (41mm)
• Thickness:

• ¹/₄" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
• 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

Note:

• When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Quick Overview